1

Тема: Letters for Pan yong qing / Письма для директора китайской фабрики

Реквизиты для перевода Western Union:

first name is: yong qing
last name is: Pan
China

Реквизиты для перевода PayPal: edgar@chinaluster.com (комментарий Sindyyang2012)

2013-09-12, 22:02

Dear Pan yong qing,
Thank you very much ...
The investor can transfer money in the coming days.
Blue balls are made much worse green ...

http://img-fotki.yandex.ru/get/9313/158289418.d8/0_bc713_14e60265_L.jpg
I found a cracked bulb. I'll tell you how many cracked balls after full checking.

http://img-fotki.yandex.ru/get/5004/158289418.d8/0_bc714_3b357f12_L.jpg
About half of all the blue balls have the verge of cubic workpieces...

http://img-fotki.yandex.ru/get/9171/158289418.d8/0_bc711_667533a9_L.jpg
If the line gets in a zone of the equator, the resonator is not working..

http://img-fotki.yandex.ru/get/9509/158289418.d8/0_bc712_78ad48d2_L.jpg
To face disappeared, you need to reduce the ball on the 1080 micron.

For laboratory tests need balls of different diameters.

You can make them as follows...

You start to grind balls with a diameter of 11.5 mm

All the balls are gradually reduced and become identical. Precise = 1 micron or better.

http://img-fotki.yandex.ru/get/9171/158289418.d8/0_bc711_667533a9_L.jpg
Some balls have the verge of cubic workpieces. Let it be so.

You put 5 ideal balls when all the balls falling by 2 micron.

Then delay even 5 ideal  balls when all the balls falling by 2 micron.

You need to put off 5 balls while in the machine is the correct process of polishing.

As a result, You will get the following set of ideal balls:

11 498 microns 5 pcs
11 496 microns 5 pcs
11 494 microns 5 pcs
11 492 microns 5 pcs
11 490 microns 5 pcs
11 488 microns 5 pcs
11 486 microns 5 pcs
11 484 microns 5 pcs
11 482 microns 5 pcs
11 480 microns 5 pcs
11 478 microns 5 pcs
11 476 microns 5 pcs
11 474 microns 5 pcs
11 472 microns 5 pcs
11 470 microns 5 pcs
11 468 microns 5 pcs
11 466 microns 5 pcs
11 464 microns 5 pcs
11 462 microns 5 pcs
11 460 microns 5 pcs
11 458 microns 5 pcs
...
11 100 microns 5 pcs

Sum = 1000 pcs

If the quality of the balls will be good, that asphericity of less than a micron, we will increase the number of balls in each size.

I need proforma invoice for this work smile

Warm wishes,
Your AK

2

Re: Letters for Pan yong qing / Письма для директора китайской фабрики

Dear A. K
  Thank you very much for your reply.
  Ok, we will try our best to make the spinel balls quality as good as possible for you. Please don't worry this.
  Please tell us clearly the exact sizes and quantity for each color, so that I can make the PI for you correctly.
  Do you mean need the 11.5mm spinel balls totally 1000pcs for this order 2 ?  If so, please tell us the exact pcs for each color. Thank you. And I will make a PI for you soon after I get the information clearly.
  Hope you can import more and more spinel balls from our factory. We will try our best to do the quality as good as possible.
  Best regards!
  Pan yong qing

Please tell us clearly the exact sizes and quantity for each color, so that I can make the PI for you correctly.

All balls #113 color

11 498 microns 5 pcs
11 496 microns 5 pcs
11 494 microns 5 pcs
11 492 microns 5 pcs
11 490 microns 5 pcs
11 488 microns 5 pcs
11 486 microns 5 pcs
11 484 microns 5 pcs
11 482 microns 5 pcs
11 480 microns 5 pcs
11 478 microns 5 pcs
11 476 microns 5 pcs
11 474 microns 5 pcs
11 472 microns 5 pcs
11 470 microns 5 pcs
11 468 microns 5 pcs
11 466 microns 5 pcs
11 464 microns 5 pcs
11 462 microns 5 pcs
11 460 microns 5 pcs
11 458 microns 5 pcs
...
11 100 microns 5 pcs
Sum = 1000 pcs

Do you mean need the 11.5mm spinel balls totally 1000pcs for this order 2 ?

Kushelev: No! I need different diameter balls.
See ones more, please: http://nanoworld.org.ru/topic/597/

Warm wishes,
Your AK

3

Re: Letters for Pan yong qing / Письма для директора китайской фабрики

Dear A. K
  Thank you very much for your prompt reply.
  Ok, I have now made a PI and counted the total costs in the PI for the order 2 already.
  Please take your time to check and confirm the PI.
  If there is no any mistakes in the PI, then you can confirm it and arrange to send out the T/T to our HK account according to the "SUPPLIER BANK INFORMATION" in the PI.
  We will start to prepare and produce the 11.5mm spinel balls soon after the T/T reaches our HK account.
  And will try to finish the products in about 10-15 days from the T/T reaches our HK account.
  Hope you can import more and more spinel and ruby balls directly from our factory. We will always try our best to serve you well.
  Best regards!
  Pan yong qing
--
Company: Great Wall Gems Factory
  Website: www.greatwallgems.com
  Email: gwgem@126.com

http://img-fotki.yandex.ru/get/9508/158289418.d8/0_bc820_75611c44_orig.png

Dear Pan yong qing,
Thank you very much ...
PI is OK!
We are waiting for the investor...
Warm wishes,
Your AK

4

Re: Letters for Pan yong qing / Письма для директора китайской фабрики

Dear Pan yong qing
The investor plans to order products from ruby too. Rubin will need to drill along the optical axis. You need to put a label marker in polarized light and drilled the ball through the marked point. The quantity of ruby balls of different diameters will exceed one million in each lot. These orders are likely to begin in the end of the year or later.
Warm wishes,
Your AK

5

Re: Letters for Pan yong qing / Письма для директора китайской фабрики

Dear A. K
  Thank you very much for your prompt reply.
  Ok, you please inform me after you and your investor send out the T/T successfully.
  We will start to produce the spinel ball soon after the T/T reaches our HK account. And will try our best to finish them and keep good quality and send them to you as quickly as possible.
  As to the ruby balls, it is ok.
  You please tell me the exact sizes and the hole sizes your need. We will produce the ruby balls according to your requirement.
  Do you mean the ruby balls will be 1000000pcs for each sizes, or totally for all the sizes? Thank you for your confirmation.
  In a word, we will try our best to serve you well always.
  Best regards!
  Pan yong qing




--
Company: Great Wall Gems Factory
  Website: www.greatwallgems.com
  Email: gwgem@126.com

1 000 000 pcs - for each size. But it is very important to properly Orient ruby ball to drill a hole along the optical axis. It needs to look at ruby ball in polarized light and spin to be such a picture:

http://img-fotki.yandex.ru/get/9513/158289418.f4/0_c4f22_74f24342_L.jpg
Original: http://img-fotki.yandex.ru/get/9513/158 … 2_orig.jpg

Output optical axis can mark with a marker. Bulbs should be placed in cells of a matrix for drilling marks upwards, i.e. to drill passed through the mark the spot left by the marker. The deviation of the axis of the hole from the optical axis 3 degrees. For this work investor is willing to pay, too. It is desirable to learn how to drill holes in ruby before the start of large orders, not to lose time in the future.

6

Re: Letters for Pan yong qing / Письма для директора китайской фабрики

Dear A. K
  Thank you very much for your prompt reply and confirmation on the quantity of the ruby balls of the next orders.
  Yes, of course, I will surely good quality ruby material to do the ruby balls. And I will let my workers drill the holes very very carefully.
  I will keep the ruby ball and hole quality. Please don't worry this.
  And, I can guarantee to drill holes better than the last order 1.
  I am confident that the ruby ball and holes will meet the satisfaction of your investor surely.
  Looking forward to your this order 2 soon.
  And then, let us do the large orders of the ruby balls for you from the next order 3.
  Best regards!
  Pan yong qing

Dear Pan yong qing,

You do not understand an important detail...

http://img-fotki.yandex.ru/get/6114/158289418.5/0_8018c_470791a8_orig.gif

video: http://video.yandex.ru/users/kushelev20120/view/26/

The optical axis of the ruby ball can be seen only in polarized light, i.e. by 2 polarizing filters.

Hole to be drilled along the optical axis. In ruby ball only one optical axis. It should be able to find...

http://youtu.be/ZfiNNZBivPs

7

Re: Letters for Pan yong qing / Письма для директора китайской фабрики

Dear A. K
  Thank you very much for your prompt reply.
  No problem. I will try my best to drill the hole of the ruby balls along the optical axis. Please don't worry this.
  One question, are the holes of the last spinel balls along the optical axis? Please confirm me this clearly.
  In a word, we will produce the ruby balls and drill the holes according to your requirement. Please don't worry this.
  Another question is: When do you or your investor send out the T/T of the order 2?
  We hope you can place us orders steadily and regularly. We will try our best to do the quality as good as possible and meet your satisfaction and needs.
  Best regards!
  Pan yong qing

Dear  Pan yong qing,
Spinel hasn't optical axis.
Spinel can be drilled in any direction, and the ruby only one. So we started with a spinel.
For large orders rubin better than spinel, but will have to orient balls in polarized light.

http://youtu.be/ZfiNNZBivPs - You can see it on this video. Drilling ruby ball can be only through the cross.

Drilling the ball from spinel can be in any direction.
Warm wishes
Your AK

8

Re: Letters for Pan yong qing / Письма для директора китайской фабрики

Dear A. K
  Thank you very much for your prompt reply.
  If so, the first step is how to find the optical axis. Please tell us how to find the optical axis easily. Then we can make a mark at the optical axis point and drill them.
  I can't open the video ( http://youtu.be/ZfiNNZBivPs ). Please check the site and send me again.
  I hope the hole drilling of the ruby balls is not too complex.
  Firstly, I hope you can arrange to send out the T/T of the order 2 and let's finish the order 2. Then let's do the ruby balls.
  Best regards!
  Pan yong qing

Dear Pan yong qing,

http://youtu.be/UjoHx4Lbm1E

> Then we can make a mark at the optical axis point and drill them.

OK!

> Firstly, I hope you can arrange to send out the T/T of the order 2 and let's finish the order 2. Then let's do the ruby balls.

OK! It mast be 2013-11-06. But it is better to learn to search for the optical axis of today, not to lose time tomorrow smile

Warm wishes,
Your AK

9

Re: Letters for Pan yong qing / Письма для директора китайской фабрики

Letters for Pan yong qing / Письма для директора китайской фабрики

Dear A. K
  Thank you very much for your prompt reply.
  Yes, it is important for me to lean how to find the optical axis and make a mark at the point and drill the ruby balls correctly.
  But, I am sorry, the site you sent to me can't be opened (http://youtu.be/UjoHx4Lbm1E).
  Please try to send me a video and show me how to find the optical axis soon.
  You mean you can arrange to send out the T/T of the order 2 on 2013.11.6? Please confirm this too. Thank you.
  Best regards!
  Pan yong qing

Dear  Pan yong qing,
>you can arrange to send out the T/T of the order 2 on 2013.11.6?
Yes
See Atrtach
Warm wishes,
Your AK

Attach:
http://youtu.be/ZfiNNZBivPs
http://youtu.be/UjoHx4Lbm1E

10

Re: Letters for Pan yong qing / Письма для директора китайской фабрики

Учебный материал для директора китайской фабрики по производству рубиновых шариков. Показываю, как находить оптическую ось в сапфировом шаре с помощью поляризационных фильтров.

http://img-fotki.yandex.ru/get/9253/158289418.f5/0_c5934_afae408b_-1-XL.jpg
Оригинал: http://img-fotki.yandex.ru/get/9253/158 … b_orig.jpg

http://img-fotki.yandex.ru/get/6706/158289418.f5/0_c5935_9ca534db_-1-XL.jpg
Оригинал: http://img-fotki.yandex.ru/get/6706/158 … b_orig.jpg

http://img-fotki.yandex.ru/get/6706/158289418.f5/0_c5936_11860311_-1-XL.jpg
Оригинал: http://img-fotki.yandex.ru/get/6706/158 … 1_orig.jpg

http://img-fotki.yandex.ru/get/9317/158289418.f5/0_c5937_320e527d_-1-XL.jpg
Оригинал: http://img-fotki.yandex.ru/get/9317/158 … d_orig.jpg